Opens in a new tab

Earthing tester ELBRO ET18 for NIV/NIN CATIII 600V

Description:

ELBRO ET18 grounding tester, with cable reel system, 10 m double-insulated measuring cable, with OLED display, measuring time 1 s, polarity change during measurement, display of + value, – value, and average value, display of room temperature during measurement, CAT III 600 V (phase–ground) and (phase–phase), test current > 200 mA, test voltage < 4 V, measuring range 0.00…29.9 W, resolution 0.01 ohms, pollution degree 2, 9 V block battery 1200 mA lithium manganese oxide (LiMnO2) 6LR61/6F22, battery life Lo: > 5000 measurements at 1 ohm, recalibration possible before measurement, beep tone can be set to 1 or 2 ohms, stores the last measured value even after switching off, weight including battery 460 g, dimensions 130×62 mm, measurements are performed in accordance with Swiss NIV/NIN, this measuring device also complies with standards EN 61010-1:2010, EN 61557-1-2-4, EMC IEC/EN 61326-1:2013, and IEC/EN 61326-2-2:2013.

Item no.: ET18

E number: 980430369

EAN: 7611664177361

Contact us

Additional information

Downloads, media & accessories

Replacement

Earthing tester ELBRO ET24-10 for NIV/NIN CATIII 600V

Item no.: ET24-10

E number: 980430389

EAN: 7611664195075

Accessories

Battery Lithium manganese dioxide LR22 9V

Article no.: LR22-ET18

E-number: 953003005

EAN: 7611664177149

Case for measuring devices ELBRO CA15 230×160×80mm

Article no.: CA15

E-number: 983910369

EAN: 7611664163401

PE measuring adapter

Item no.: PE-MESSADAP

E number: 980962009

EAN: 7611664171406