KMA-F8 Analog Transmitter, 24 V AC/DC, 0–10 V DC, On/Off/Auto

The analog transmitter is used for manual control variable adjustment, e.g., for mixing dampers, valve positions, temperature values, etc. The module can be controlled via two operating modes, which are selected using the three-position switch (ON, OFF, AUTO) on the front panel. The switch position is fed back via the external control contact terminals B1 and B2. Switch position ON: The control variable can be adjusted using the front-panel potentiometer. The 0 to 10 V output signal is available at terminal Y. Switch position AUTO: The control variable is passed through to the control variable output Y via terminal YR without modification.
Connection with spring-loaded terminals (push-in)
Setpoint transmitter
Manual control panel with feedback
LED brightness proportional to the control variable